Categories
Architecture

Writing Assignment Prompt: Using this project as research, interrogate how Wrigh

Writing Assignment Prompt:
Using this project as research, interrogate how Wright utilizes the specification (drawings) of
technique as a means to change the technology (structural system) in order to maintain the
design intent (revisions to form and physical space) which were acceptable compromises to
his original idea.
Supplemental Points:
In this case, the revisions required in the structural design resulted from technology not being
able to fully support the design intent of the Architect. This forced Frank Lloyd Wright to modify
the architecture as originally conceived. Because of this necessity, Wright was forced to
compromise somewhat. However, in order to maintain his agency over the concept, Wright
did so in a manner which adhered to his original design vision. This approach is how Wright
exerted and maintained his agency over the architecture by working, searching and
interrogating emerging material techniques in order to adhere as closely as possible to the
original concept.

Categories
Architecture

Brief reading response based on the provided reading materials – Raised at least

Brief reading response based on the provided reading materials
– Raised at least one discussion question – Raised at least one comment on the readings
– Share your thoughts from an architectural perspective about the providing readings
– Third reading material: https://www.archpaper.com/2022/08/response-sci-arc…
QUESTIONS TO KEEP IN MIND WHEN READING (and to discuss in your reading responses if you like):
What is culture and does it determine economic systems or do economic systems determine culture? (not that it’s necessarily one way or the other, of course!).
Is Althusser’s notion of ideology synonymous with “culture” or “beliefs” or does it go beyond these? How so?
Can you think of ways that specific architectures might function in an ideological manner? Can you think of ways that processes of architectural production involve ideology?

Categories
Architecture

4=|×+2| 4=|2×-1| ________ – 0=|×+2|-|2×-1| |2×-1|=|×+2| (2x-1) ² = (x+2) ² (2x-

4=|×+2| 4=|2×-1|
________ – 0=|×+2|-|2×-1| |2×-1|=|×+2|
(2x-1) ² = (x+2) ² (2x-1) ² – (×+2) ²=0 (3x+1) (x-3) =0 x=-1/3 x=3 -1/3=4=(x+2) 4=(-1/3+2) 4=(-1/3+6/3) 4=(5/3) x=3 4=(x+2) 4=(3+2) 4=5 jadi tp = {(-1/5, 5/3) , (3,5)}

Categories
Architecture

In our final project, we are will be redirecting our focus within Revit and util

In our final project, we are will be redirecting our focus within Revit and utilizing the program as a design tool as opposed to using it strictly to create construction documents; the goal of this assignment is to begin using more of the customization tools within Revit and finalize the project into a presentation format acceptable for studio or design presentation (not for construction submittals which was our focus in the previous building).
Each student will be required to complete a final BIM project of a 2-story building. The program is your choice (residence, office, cafe, restaurant etc…), however, the initial form of the building should be based on a rock that you have found. We will start this project by modeling a simplified faceted version of your found rock which will act as the building form for your design; it is a requirement for this assignment that you start the project in this manner and follow the steps in the Project 4 Intro lecture to model your rock in Revit using the In-Place massing tools. Once the building form has been modeled, you will design the interiors by adding the interior walls, bathroom(s), and kitchen with appliances (cabinets, countertops, plumbing fixtures etc…). Additionally, you will have to design/create your own custom staircase (not use the generic staircase in Revit); the staircase design should be entirely your own (you should not copy the one provided in the future stair lecture).
This assignment will require two renderings using a plug-in program called Enscape (https://enscape3d.com/) which is a free program but it does require you to sign-up with your school email before they email you a download license (this can take a day or two so I recommend signing up sooner rather than later and not at the last minute); in the past, some students who are using a Mac have had problems with Enscae as it does not work with some graphic cards found in a mac, In order to complete the rendering, as well as completing your drawings properly, you will have to place materials on all of your objects and surfaces within the model; you can start the design process using Generic Walls/Floors/Roofs and then add materials to the Wall/Floor/Roof as you progress with the design . After modeling the project, we will be working on methods to export your drawings and place them in InDesign to add any finishing touches and make them presentable for a digital presentation format. For this last step, you will have to download InDesign to complete the assignment; refer to the Software page for more information on downloading InDesign.
Follow the rubric below to guide you through the requirements for each drawing; however, the final submission will be a 36″ x 48″ PDF digital presentation board along with your Revit file. We will be going through the steps on how to create the digital presentation board later in the semester. Make sure to submit both the Revit File and the Digital Presentation Board to receive a full grade for this assignment.
View Rubric

Categories
Architecture

In our final project, we are will be redirecting our focus within Revit and util

In our final project, we are will be redirecting our focus within Revit and utilizing the program as a design tool as opposed to using it strictly to create construction documents; the goal of this assignment is to begin using more of the customization tools within Revit and finalize the project into a presentation format acceptable for studio or design presentation (not for construction submittals which was our focus in the previous building).
Each student will be required to complete a final BIM project of a 2-story building. The program is your choice (residence, office, cafe, restaurant etc…), however, the initial form of the building should be based on a rock that you have found. We will start this project by modeling a simplified faceted version of your found rock (use any rock you can find it does not matter) which will act as the building form for your design; it is a requirement for this assignment that you start the project in this manner and follow the steps in the Project 4 Intro lecture to model your rock in Revit using the In-Place massing tools. Once the building form has been modeled, you will design the interiors by adding the interior walls, bathroom(s), and kitchen with appliances (cabinets, countertops, plumbing fixtures etc…). Additionally, you will have to design/create your own custom staircase (not use the generic staircase in Revit); the staircase design should be entirely your own (you should not copy the one provided in the future stair lecture).
This assignment will require two renderings using a plug-in program called Enscape (https://enscape3d.com/) which is a free program but it does require you to sign-up with your school email before they email you a download license (this can take a day or two so I recommend signing up sooner rather than later and not at the last minute); in the past, some students who are using a Mac have had problems with Enscape as it does not work with some graphic cards found in a mac, In order to complete the rendering, as well as completing your drawings properly, you will have to place materials on all of your objects and surfaces within the model; you can start the design process using Generic Walls/Floors/Roofs and then add materials to the Wall/Floor/Roof as you progress with the design. After modeling the project, we will be working on methods to export your drawings and place them in InDesign to add any finishing touches and make them presentable for a digital presentation format. For this last step, you will have to download InDesign to complete the assignment
Follow the rubric below to guide you through the requirements for each drawing; however, the final submission will be a 36″ x 48″ PDF digital presentation board along with your Revit file. We will be going through the steps on how to create the digital presentation board later in the semester. Make sure to submit both the Revit File and the Digital Presentation Board to receive a full grade for this assignment.

Categories
Architecture

In our final project, we are will be redirecting our focus within Revit and util

In our final project, we are will be redirecting our focus within Revit and utilizing the program as a design tool as opposed to using it strictly to create construction documents; the goal of this assignment is to begin using more of the customization tools within Revit and finalize the project into a presentation format acceptable for studio or design presentation (not for construction submittals which was our focus in the previous building).
Each student will be required to complete a final BIM project of a 2-story building. The program is your choice (residence, office, cafe, restaurant etc…), however, the initial form of the building should be based on a rock that you have found. We will start this project by modeling a simplified faceted version of your found rock which will act as the building form for your design; it is a requirement for this assignment that you start the project in this manner and follow the steps in the Project 4 Intro lecture to model your rock in Revit using the In-Place massing tools. Once the building form has been modeled, you will design the interiors by adding the interior walls, bathroom(s), and kitchen with appliances (cabinets, countertops, plumbing fixtures etc…). Additionally, you will have to design/create your own custom staircase (not use the generic staircase in Revit); the staircase design should be entirely your own (you should not copy the one provided in the future stair lecture).
This assignment will require two renderings using a plug-in program called Enscape (https://enscape3d.com/) which is a free program but it does require you to sign-up with your school email before they email you a download license (this can take a day or two so I recommend signing up sooner rather than later and not at the last minute); in the past, some students who are using a Mac have had problems with Enscae as it does not work with some graphic cards found in a mac, In order to complete the rendering, as well as completing your drawings properly, you will have to place materials on all of your objects and surfaces within the model; you can start the design process using Generic Walls/Floors/Roofs and then add materials to the Wall/Floor/Roof as you progress with the design . After modeling the project, we will be working on methods to export your drawings and place them in InDesign to add any finishing touches and make them presentable for a digital presentation format. For this last step, you will have to download InDesign to complete the assignment; refer to the Software page for more information on downloading InDesign.
Follow the rubric below to guide you through the requirements for each drawing; however, the final submission will be a 36″ x 48″ PDF digital presentation board along with your Revit file. We will be going through the steps on how to create the digital presentation board later in the semester. Make sure to submit both the Revit File and the Digital Presentation Board to receive a full grade for this assignment.
View Rubric

Categories
Architecture

In our final project, we are will be redirecting our focus within Revit and util

In our final project, we are will be redirecting our focus within Revit and utilizing the program as a design tool as opposed to using it strictly to create construction documents; the goal of this assignment is to begin using more of the customization tools within Revit and finalize the project into a presentation format acceptable for studio or design presentation (not for construction submittals which was our focus in the previous building).
Each student will be required to complete a final BIM project of a 2-story building. The program is your choice (residence, office, cafe, restaurant etc…), however, the initial form of the building should be based on a rock that you have found. We will start this project by modeling a simplified faceted version of your found rock (use any rock you can find it does not matter) which will act as the building form for your design; it is a requirement for this assignment that you start the project in this manner and follow the steps in the Project 4 Intro lecture to model your rock in Revit using the In-Place massing tools. Once the building form has been modeled, you will design the interiors by adding the interior walls, bathroom(s), and kitchen with appliances (cabinets, countertops, plumbing fixtures etc…). Additionally, you will have to design/create your own custom staircase (not use the generic staircase in Revit); the staircase design should be entirely your own (you should not copy the one provided in the future stair lecture).
This assignment will require two renderings using a plug-in program called Enscape (https://enscape3d.com/) which is a free program but it does require you to sign-up with your school email before they email you a download license (this can take a day or two so I recommend signing up sooner rather than later and not at the last minute); in the past, some students who are using a Mac have had problems with Enscape as it does not work with some graphic cards found in a mac, In order to complete the rendering, as well as completing your drawings properly, you will have to place materials on all of your objects and surfaces within the model; you can start the design process using Generic Walls/Floors/Roofs and then add materials to the Wall/Floor/Roof as you progress with the design. After modeling the project, we will be working on methods to export your drawings and place them in InDesign to add any finishing touches and make them presentable for a digital presentation format. For this last step, you will have to download InDesign to complete the assignment
Follow the rubric below to guide you through the requirements for each drawing; however, the final submission will be a 36″ x 48″ PDF digital presentation board along with your Revit file. We will be going through the steps on how to create the digital presentation board later in the semester. Make sure to submit both the Revit File and the Digital Presentation Board to receive a full grade for this assignment.

Categories
Architecture

Hi, I need someone who can help me with my publish presentation. I need an explana

Hi, I need someone who can help me with my publish presentation. I need an explanation for each part, which should be two pages long. This is the Architecture presentation and Wrote my ideas in the attached PFD.
Deliverables
You must create a digital package (pdf) and 2–5-minute presentation using your graphic standards that contain in the attached file.

Categories
Architecture

Write a “one-page” criticism of the building/space.

Visit an architecturally significant work in Tampa Florida. It may be a historic or contemporary building, or an urban space. The purpose of this assignment is to encourage observation and critical thought.
Write a “one-page” criticism of the building/space.
Include a photograph, drawing, or diagram for reference.
Hint – Don’t start your criticism by saying, “The building I chose to visit was…,” instead refer back to the writing styles of the critics you researched in Module 6.
This criticism should be from a current, first hand experience…..not a place you visited months ago.

Categories
Architecture

Please make sure to use revit

Please replicate the two files shown below into Revit
I need the actual Revit files NOT pdfs
thank you
PLEASE MAKE SURE TO USE REVIT